The SANTI EDGE is the newest flagship drysuit in the SANTI range, developed specifically for divers operating in the most demanding underwater environments. Constructed from the innovative Trilaminate DuraWave™ fabric reinforced with Kevlar®, it offers exceptional resistance to abrasion, tears and cuts while maintaining the flexibility required for complex technical dives.
Every aspect of the EDGE has been designed with expedition diving in mind. Reinforced impact zones, ergonomic patterning and premium components provide outstanding durability without restricting movement, making it an ideal choice for cave, wreck, mine and extended decompression diving.
Like all premium SANTI drysuits, the EDGE is available in standard sizes with alteration options or as a fully Made-to-Measure suit. A range of factory upgrades including Heating Valves, P-Valves, Smart Glove System and custom sizing allows every suit to be configured to the diver’s exact requirements.
Custom Configuration
Typical Drysuit Configuration & Options
Final pricing depends on size, configuration and selected options. The guide below shows common drysuit options so you can understand how a custom order is typically built.
Base Drysuit
The starting price shown above applies before optional upgrades, custom sizing or accessories.
5800
Made-to-Measure Options
Standard sizes include up to four complimentary alterations (maximum 5 cm per alteration).
Additional alterations beyond the fourth are charged at AUD $100 per alteration.
A full Made-to-Measure suit, individually built from your complete body measurements, is available as an optional upgrade.
800
Quick Neck System (Upgrade)
The standard suit includes a latex neck seal. Upgrade to the Quick Neck System for quick and tool-free neck seal replacement.
300
Smart Glove System
Upgrade to the SANTI Smart Glove System for quick installation and removal of compatible dry gloves. Dry gloves are sold separately and are not included with this upgrade.
250
P-Valve Installation (Halcyon P-valve included)
Includes supply and professional installation of the selected P-Valve. Every installation is pressure tested before the suit is delivered.
Installing a P-Valve yourself may reduce the initial cost, but post-delivery modifications may affect the manufacturer’s warranty and are not recommended.
580
Heating Valve Upgrade
Upgrade the standard inflation valve to a heated valve for use with compatible electrically heated undergarments. Available with either Apeks or SI TECH 303 heating valves.
790
Boots or Socks
Choose either integrated Flexsole Boots or neoprene socks. Both options are included at no additional cost.
Free
Custom Colour Configuration
The SANTI EDGE is supplied in its exclusive factory colour configuration. Custom colour options are not available for this model.
N/A
Technical Specifications+
Suit Material
Trilaminate DuraWave™ with Kevlar®
Outer Fabric
60.5% Nylon
20% Polyester
12% Kevlar®
7.5% PU
Weight
Approx. 4.3 kg in size L with boots
Reinforcement
Kevlar® knees
Kevlar® elbows
Kevlar® upper body
2.5 mm internal knee pads
Leg Design
Saddle-type crotch gusset
Torso Design
Y-cut ergonomic torso
Recommended Diving
Technical & Exploration Diving
Country of Manufacture
Poland
Lead Time
8–12 Weeks
Typical Lead Time
Approximately 8–12 weeks for most custom orders, depending on configuration and factory production schedules.
Warranty
Three-year manufacturer’s warranty covering seams, fabric and workmanship. Individual components are covered under their respective manufacturer warranties.
Standard Configuration & Available Upgrades+
Entry System
Supplied as standard with a front-entry gas-proof plastic zipper protected by an external cover zip. Metal zipper / back entry configuration is available as an optional upgrade on selected models.
Inflation Valve
Supplied with an Apeks inflation valve as standard. An Apeks or SI TECH 303 Heating Valve can be selected as an optional upgrade.
Exhaust Valve
Supplied with an Apeks high-profile automatic exhaust valve as standard. Low profile valves available on request.
Neck Seal
Standard configuration includes a latex neck seal with a 3 mm neoprene warm neck collar. Upgrade to the SANTI Quick Neck System for fast, tool-free seal replacement. Neoprene neck seal available on request.
Wrist Seal System
Includes the SANTI Smart Seals® System with HD bottleshape latex wrist seals as standard, allowing quick wrist seal replacement without adhesive.
Boots / Socks
Choose either integrated Flexsole Boots or neoprene socks at no additional cost to suit your preferred diving setup.
Technical Cargo Pockets
Two large technical cargo pockets with internal organisation are included as standard.
Internal Suspenders
Adjustable internal suspenders are included to improve fit and comfort during surface preparation and diving.
Included Accessories
Includes a medium-pressure inflation hose, zipper lubricant, seal talc, owner’s manual and waterproof transport bag.
Colour Configuration
Grey / Black / Red Factory Colourway
The SANTI EDGE is supplied in its exclusive factory colour configuration. Custom colour options are not available for this model.
Standard Size Alterations
Standard sizes include up to four complimentary alterations (maximum 5 cm per alteration). Additional alterations beyond the fourth are available for AUD $100 per alteration. A full Made-to-Measure suit is available as an optional upgrade.
Factory Configuration
Every drysuit is individually configured before production. Optional upgrades including Heating Valves, Smart Glove System, Quick Neck System, P-Valves and Made-to-Measure sizing can be selected during the ordering process.
FAQ
EDGE FAQ
Is the SANTI EDGE made to measure?
Yes. The SANTI EDGE is available in standard sizes with complimentary alterations, or as a full Made-to-Measure drysuit for divers requiring a completely custom fit.
How long does it take to receive a SANTI EDGE drysuit?
Most SANTI EDGE drysuits are built to order. Typical production time is approximately 8 to 12 weeks, depending on the selected configuration and factory production schedule.
Can I upgrade the SANTI EDGE with a Quick Neck or Heating Valve?
Yes. The EDGE can be configured with factory-installed upgrades including the Quick Neck System, Heating Valve, Smart Glove System, P-Valve and Made-to-Measure sizing.
Can I choose custom colours for the SANTI EDGE?
No. The SANTI EDGE is supplied in its exclusive factory colour configuration and is not available with custom colour options.
Who is the SANTI EDGE designed for?
The SANTI EDGE is designed for divers operating in demanding environments including technical, cave, wreck and expedition diving, where maximum durability and abrasion resistance are essential.
Need Help Configuring Your Drysuit?
Request a Personal Drysuit Quote
A custom drysuit should be configured around your body, undergarments, diving style and future goals. Contact our team for personalised advice before ordering.
