Scuba Regulators
Regulator servicing for first stages, second stages, octopus regulators and alternate air sources used by recreational and technical divers.
Precision Dive Equipment Servicing
Scuba Equipment Servicing Melbourne
Professional scuba equipment servicing for recreational and technical divers across Melbourne and the Mornington Peninsula.
Precision workshop scope
What We Service
Professional scuba equipment servicing for Melbourne divers, from recreational regulator sets to technical diving hardware.
BCD Servicing
BCD servicing and inspection for inflators, dump valves, corrugated hoses, bladder condition and general buoyancy control system function.
SPGs & Hoses
Inspection and servicing support for scuba pressure gauges, low-pressure hoses, high-pressure hoses and common hose connection issues.
Cylinder Valves
Standard valve servicing, manifold valve servicing and support for scuba cylinders used for air, nitrox and technical diving applications.
Twinsets & Manifolds
Servicing support for twinsets, isolation manifolds, bands and technical diving cylinder configurations.
Technical Diving Equipment
Equipment servicing support for stage regulators, deco regulators, long hose setups and technical diving gear configurations.
Maintenance and reliability
Why Annual Scuba Equipment Servicing Matters
Scuba equipment operates in a harsh saltwater environment where internal wear, corrosion, contamination and pressure-related component fatigue can develop over time. Regular scuba equipment servicing helps maintain regulator performance, breathing consistency, hose integrity and overall dive reliability for both recreational and technical divers.
Annual scuba regulator servicing and inspection can also help identify worn components, salt buildup, damaged seals and potential failures before they become larger equipment issues underwater.
Prevent Saltwater Corrosion
Saltwater exposure can gradually damage internal scuba equipment components if not properly maintained and serviced.
Maintain Regulator Performance
Regular servicing helps maintain breathing performance, pressure consistency and regulator reliability underwater.
Detect Wear Before Failure
Equipment inspections can identify worn seals, hose issues and aging components before they become serious problems.
Keep Equipment Dive Ready
Properly serviced scuba equipment is better prepared for local diving, travel, training and technical diving use.
Workshop proof
Why Divers Trust Our Workshop
Local scuba equipment servicing backed by real workshop experience, technical diving support and a hands-on dive shop environment.
Years of Service Experience
Our service technician has more than 25 years of experience working with scuba regulators, BCDs, cylinder valves and dive equipment.
Most Major Brands Supported
We service and support a wide range of recreational and technical scuba equipment brands, depending on parts and service kit availability.
Active Technical Diving Experience
Our team actively dives and supports technical diving equipment including twinsets, stage regulators, long hose setups and decompression configurations.
Melbourne Dive Shop Support
Servicing is handled through our local dive shop for Melbourne and Mornington Peninsula divers, with clear advice before extra work is carried out.
Workshop utility
Workshop Service Pricing
Professional scuba equipment servicing for Melbourne recreational and technical divers. Replacement parts and service kits charged separately where required.
Regulator & Equipment Servicing
Workshop Services- Recreational Full Set Service First stage, second stage, octopus and LP hose. Service labour only.
- $150
- First Stage Service Service labour only.
- $65
- Second Stage Service Service labour only.
- $50
- HP Gauge Service Inspection and servicing support.
- $20
- LP Hose Replacement Labour only.
- $15
- BCD Servicing Service labour only.
- $60
Additional labour may apply for heavily corroded, contaminated or poorly maintained equipment.
Testing & Additional Services
Precision Workshop- Dive Computer Battery Model dependent.
- From $60
- Dive Computer Pressure Test Pressure testing service.
- $30
- Drysuit Pressure Test Leak inspection and testing.
- $50
- Drysuit Patch & Pressure Test Includes one repair patch.
- $60
- Additional Drysuit Patch Per additional repair location.
- $30
- P-Valve Installation Labour only.
- $50
- Regulator O2 Cleaning Standard servicing labour plus required kits and parts.
- Quote
Extreme Watersport Dive Club members receive 10% off eligible servicing and workshop labour, along with priority placement in the servicing queue during busy periods.
Workshop FAQ
Scuba Equipment Servicing FAQ
Common questions about scuba regulator servicing, BCD servicing, drysuit testing and technical diving equipment servicing in Melbourne.
How often should scuba regulators be serviced?
Most scuba regulators should be professionally serviced every 12 months or according to manufacturer recommendations, especially if regularly used in saltwater conditions.
Do scuba regulators need annual servicing?
Annual scuba regulator servicing helps maintain breathing performance, internal component condition and overall regulator reliability for recreational and technical diving.
Do you service technical diving regulators and twinset setups?
Yes. We support technical diving equipment including twinset regulators, stage regulators, long hose configurations and decompression regulator setups.
Can you service most scuba equipment brands?
We service and support a wide range of scuba equipment brands depending on parts availability, service kit availability and workshop support requirements.
Are replacement parts and service kits included in scuba servicing prices?
Standard servicing prices listed are labour only unless otherwise stated. Replacement parts, service kits and additional repairs are charged separately where required.
How long does scuba equipment servicing take in Melbourne?
Standard scuba equipment servicing turnaround is usually around one week under normal workshop conditions. During peak diving season, delays may occur depending on workshop workload, equipment condition and servicing requirements.
Poorly maintained, heavily corroded or contaminated equipment may require additional servicing time.
Most servicing is handled in-house through our local workshop rather than being externally outsourced, and we keep service kits for many major scuba equipment brands regularly in stock.
Express servicing may also be available at an additional charge depending on workload and technician availability.
Do you offer regulator O2 cleaning for nitrox and technical diving?
Yes. Regulator O2 cleaning is available for nitrox, oxygen service and technical diving applications depending on regulator condition and servicing requirements.
Can you pressure test drysuits and dive computers?
Yes. We offer drysuit pressure testing, drysuit leak inspection, patch repairs and dive computer pressure testing services.