The SANTI E.Lite Drysuit is one of the most established technical diving drysuits in the SANTI range, trusted by cave, wreck and cold-water divers around the world. Built from premium trilaminate fabric with extensive reinforcement in high-wear areas, it offers outstanding durability while maintaining excellent mobility and long-term comfort.
Designed for demanding diving conditions, the E.Lite combines proven construction with practical features including large technical cargo pockets, Smart Seals®, ergonomic telescopic torso and a wide range of factory configuration options.
Every E.Lite drysuit is individually built to order and can be configured with optional upgrades including Quick Neck, Smart Glove System, Heating Valves, P-Valves and Made-to-Measure sizing.
Custom Configuration
Typical Drysuit Configuration & Options
Final pricing depends on size, configuration and selected options. The guide below shows common drysuit options so you can understand how a custom order is typically built.
Base Drysuit
The starting price shown above applies before optional upgrades, custom sizing or accessories.
4950
Made-to-Measure Options
Standard sizes include up to four complimentary alterations (maximum 5 cm per alteration).
Additional alterations beyond the fourth are charged at AUD $100 per alteration.
A full Made-to-Measure suit, individually built from your complete body measurements, is available as an optional upgrade.
800
Quick Neck System (Upgrade)
The standard suit includes a latex neck seal. Upgrade to the Quick Neck System for quick and tool-free neck seal replacement.
300
Smart Glove System
Upgrade to the SANTI Smart Glove System for quick installation and removal of compatible dry gloves. Dry gloves are sold separately and are not included with this upgrade.
250
P-Valve Installation (Halcyon P-Valve Included)
Includes supply and professional installation of the selected P-Valve. Every installation is pressure tested before the suit is delivered.
Installing a P-Valve yourself may reduce the initial cost, but post-delivery modifications may affect the manufacturer’s warranty and are not recommended.
580
Heating Valve Upgrade
Upgrade the standard inflation valve to a heated valve for use with compatible electrically heated undergarments. Available with either Apeks or SI TECH 303 heating valves.
790
Boots or Socks
Choose either integrated Flexsole Boots, neoprene boots or neoprene socks. Boot and sock configuration can be selected during the drysuit order process.
Free
Colour Configuration
The SANTI E.Lite is available in black, with side gores available in either black or red. Screen colours may vary from the actual fabric shade.
Available
Technical Specifications+
Suit Material
Trilaminate drysuit fabric with elastic Ripstop Nylon on the outside and polyester on the inside.
Fabric Construction
Ripstop Nylon 535 g/m² outer fabric, highly resistant to puncture and tearing with medium stretch.
Weight
Approx. 4.2 kg in men’s size L with shoes.
Reinforcement System
Kevlar® knee patches for added protection in high-wear areas.
Leg Design
Leg cut on both sides with classic stitched crotch.
Torso Design
Y-cut torso with sleeves cut at the shoulders for improved freedom of movement.
Recommended Diving
Recreational, technical and commercial diving, including demanding cold-water environments.
Durability Profile
Designed as a hard-wearing technical drysuit for divers who prioritise durability, abrasion resistance and long-term reliability.
Sizing Options
Available in standard men’s and women’s sizes, with additional alteration and full Made-to-Measure options available.
Typical Lead Time
Approximately 8–12 weeks for most custom orders, depending on configuration and factory production schedules.
Warranty
Three-year manufacturer’s warranty covering seams, fabric and workmanship. Individual components are covered under their respective manufacturer warranties.
Country of Manufacture
Designed and manufactured in Poland by SANTI Diving.
Standard Configuration & Available Upgrades+
Entry System
Available with a waterproof plastic zipper. Zipper closing side can be selected as left arm to right hip or right arm to left hip, with back-entry configuration available as an optional upgrade.
Inflation Valve
Supplied with an Apeks inflation valve as standard. An Apeks or SI TECH 303 Heating Valve can be selected as an optional upgrade.
Exhaust Valve
Supplied with an Apeks high-profile automatic exhaust valve as standard. Apeks low-profile or SI TECH exhaust valve options are available on request.
Neck Seal
Standard configuration includes a latex neck seal with warm neck collar. Neoprene, neoprene with warm neck collar, or silicone with Quick Neck System can be selected as optional configurations.
Wrist Seal System
Includes HD bottleshape wrist seals with SANTI Smart Seals® rings as standard. Cone regular or silicone wrist seal options may be selected depending on ring configuration.
Boots / Socks
Choose integrated Flexsole Boots, neoprene boots or neoprene socks to suit your preferred diving and fin setup.
Technical Cargo Pockets
Two technical cargo pockets are included, with internal organisation, elastic loops, wetnotes storage, mounting points and mesh drainage.
Internal Suspenders
Internal adjustable suspenders with a handy internal pocket are included as standard.
Included Accessories
Includes STAY DRY water-repellent travel bag, 75 cm medium-pressure hose, zipper lubricant, seal talc, mask strap, certificate, manual and instructions.
Colour Configuration
Available in black. Side gores can be configured in either black or red. Actual fabric shades may vary from screen colours.
Standard Size Alterations
Standard sizes include up to four complimentary alterations (maximum 5 cm per alteration). Additional alterations beyond the fourth are available for AUD $100 per alteration. A full Made-to-Measure suit is available as an optional upgrade.
Factory Configuration
Every drysuit is individually configured before production. Optional upgrades including zipper position, Quick Neck System, Heating Valves, Smart Glove System, P-Valves, Made-to-Measure sizing, side gore colour and dry glove compatibility can be selected during the ordering process.
FAQ
SANTI E.Lite FAQ
Is the SANTI E.Lite made to measure?
Yes. The SANTI E.Lite is available in standard men’s and women’s sizes with complimentary alterations, or as a full Made-to-Measure drysuit for divers requiring a completely custom fit.
How long does it take to receive a SANTI E.Lite drysuit?
Most SANTI E.Lite drysuits are built to order. Typical production time is approximately 8 to 12 weeks, depending on the selected configuration and factory production schedule.
Can I customise the colour of the SANTI E.Lite?
The E.Lite is available in black, with side gores available in either black or red. Actual fabric colours may vary slightly from colours shown on screen.
What upgrades are available for the SANTI E.Lite?
The E.Lite can be configured with factory-installed upgrades including Made-to-Measure sizing, Quick Neck System, Heating Valve, Smart Glove System, P-Valve, zipper options, hood options and boot or sock configurations.
Who is the SANTI E.Lite designed for?
The SANTI E.Lite is designed for recreational, technical and commercial divers who want a durable, hard-wearing drysuit with strong abrasion resistance, reliable construction and a comfortable technical fit.
Need Help Configuring Your Drysuit?
Request a Personal Drysuit Quote
A custom drysuit should be configured around your body, undergarments, diving style and future goals. Contact our team for personalised advice before ordering.
